Nka nka
| Nka na ụzụ nkọwa | |||
| Ụkpụrụ EURO | Ụkpụrụ | ||
| ENGINE Deutz injin na -eme ka ikuku jụrụ oyi | 46KW | 61,7hp | |
| Oghere oghere: | 110-219 mm | 4.3-8.6 inch | |
| Drilling n'akuku: | ntụziaka niile | ||
| Isi rotary | |||
| A. Back hydraulic rotary head (mkpọpu ala mkpanaka) | |||
| Ọsọ ntụgharị | Torque | Torque | |
| Otu moto | obere ọsọ 0-120 r/min | 1600 nm | 1180lbf.ft |
| Oke ọsọ 0-310 r/min | 700 nm | 516lbf.ft | |
| Ugboro abụọ moto | obere ọsọ 0-60 r/min | 3200 nm | 2360lbf.ft |
| Oke ọsọ 0-155 r/min | 1400 nm | 1033lbf.ft | |
| B. Isi n'ihu na -atụgharị hydraulic (aka uwe) | |||
| Ọsọ ntụgharị | Torque | Torque | |
| Otu moto | obere ọsọ 0-60 r/min | 2500 nm | 1844lbf.ft |
| Ugboro abụọ moto | obere ọsọ 0-30 r/min | 5000 nm | 3688lbf.ft |
| C. Nsụgharị ntụgharị: | 2200 nm | 1623lbf.ft | |
| Sistemụ nri: otu cylinder hydraulic na -anya yinye | |||
| Ike na -ebuli elu | 50 KN | 11240lbf | |
| Ike nri | 35 KN | 7868lbf | |
| Ihe mkpuchi | |||
| Dayameta | Ogologo: 50-219 mm | 2-8.6 inch | |
| Winch | |||
| Ike na -ebuli elu | 15 KN | 3372lbf | |
| obosara nke ndị Crawlers | Ogologo - 2260 mm | 89 inch | |
| ibu na ọnọdụ ọrụ | 9000 n'arọ | 19842 lb | |
Okwu mmalite ngwaahịa
SM-300 Rig bụ crawler etinyere na akwa hydraulic drive rig. Ọ bụ ụdị ejiji ọhụrụ ụlọ ọrụ anyị haziri ma mepụta.
Ngwa Ngwa
The rig bụ tumadi na -eji maka diamond bit mkpọpu ala na carbide bit mkpọpu ala nke ihe ndina siri ike. A pụkwara iji ya mee ihe n'ịkwado na mkpọpu ala, nyocha geotechnical na -egwu ala na igwu ala ịnweta wdg.
Isi Atụmatụ
(1) Onye ọkwọ ụgbọ ala hydraulic kacha elu na -agbada site na moto hydraulic abụọ dị elu. Ọ nwere ike na -enye nnukwu torque na obosara nke ntụgharị ntụgharị.
(2) Nri na sistemụ mbuli elu na -anabata ịnya ụgbọ ala hydraulic na nnyefe yinye. Ọ nwere ogologo nri nri ma na -enye ohere maka mkpọpu ala.
(3) V ụdị orbit dị na mast mpụta na -agbagide oke oke n'etiti isi hydraulic na mast ma na -enye nkwụsi ike na oke ntụgharị ntụgharị.
(4) Usoro mkpanaka mkpanaka na -eme ka ọrụ ahụ dị mfe.
(5) winch hydraulic maka ibuli nwere nkwụsi ike ka mma yana ikike braking dị mma.
(6) Sistemụ na -achịkwa ọkụ eletrik nwere njikwa etiti yana bọtịnụ nkwụsị mberede mberede atọ.
(7) Tebụl njikwa etiti etiti nwere ike ịkwaga dịka ịchọrọ. Gosi gị ọsọ ntụgharị, ọsọ nri na mbuli elu yana nrụgide nke sistemụ hydraulic.
(8) Sistemụ hydraulic rig na-anabata mgbapụta na-agbanwe agbanwe, valvụ na-achịkwa valvụ nha na valvụ ọtụtụ okirikiri.
(9) Ọkwọ ụgbọ ala na -anya ụgbọ ala site na moto hydraulic, yabụ na rig nwere nnukwu mmegharị ahụ.
Nkwakọ ngwaahịa & nzipu
Nkwakọ ngwaahịa nkọwa
Standard mbukota ma ọ bụ dị ka ndị ahịa chọrọ
Etiti oge :
|
Ọnụ ọgụgụ (Ntọala) |
1 - 1 |
> 1 |
|
Atụmatụ. Oge (ụbọchị) |
30 |
Ka a kpaa nkata |
